UltiMaker Tough Filament for Method

Durable, tough parts, office-friendly printing

UltiMaker Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness. An added benefit over PLA is its durability, pliability, and machinability which makes it perfect for snap fits and assemblies.

Extruder Compatibility

Makerbot Tough for Method

Support Material

  • MakerBot PVA
  • Breakaway Supports

Dimensional Accuracy

  • Finished part dimensional accuracy of ± 0.2mm (± 0.007in)1

For use on: Method | Method X

Shop Now contact us

Phone

03 9687 8638

Address

7A Kent St,
Yarraville, VIC 3013
Australia.

Send a Message

TECH SPECSImperialMetric
Heat Deflection (ASTM 648, 66 psi)125-120°F52-49°C
Flexural Modulus (ASTM D790, 15 mm/min)377,000 psi2,600 MPa
Tensile Strength at yield (ASTM D638, 50 mm/min)5,080 psi35 MPa
Tensile Modulus (ASTM D638, 50 mm/min)406,000 psi2,800 MPa
Strain at Yield – Elongation (%)>52.7%>52.7%
Notched Impact Strength (ASTM D256)4.12 ft-lb/in220 J/m

UltiMaker ABS Applications

End-Use Parts

End-Use Parts

UltiMaker Tough filament was developed not only for its strength and part performance but also to overcome two of the most glaring issues that hamper ABS: warping and curling.

Prototyping

Prototyping

At 2X the impact strength of ABS, UltiMaker Tough™ filament offers superior durability for industrial prototyping and manufacturing aid applications. With tensile and flexural strength that match ABS, designers and engineers can create parts that hold up under all types of stress.

UltiMaker Materials

MakerBot Tough Filament for Method

Want To Know More?

Our team of 3D printing professionals are just an email or a phone call away.

contact us

UltiMaker Tough for Method - Thinglab | Freedspace